Tub-to-Shower Conversion in Dunwoody, GA
Converting an unused or dated tub into a clean, low-maintenance walk-in shower for Dunwoody homes — a waterproofed pan, new valve and drain, tile or solid-surface walls, glass and a safe entry, planned with a written scope and a published typical price range.
Replacing That Unused Tub in Dunwoody
Lots of Dunwoody homes have a tub that never gets used — a hall bath with a tub-shower combo, or a primary bath with a big deck-mounted tub collecting dust. That tub takes up space and makes the bathroom harder to use.
A tub-to-shower conversion reclaims that footprint with a clean, easy-entry walk-in shower — a new waterproofed pan, tile or solid-surface walls, a niche, and a glass panel — usually without moving plumbing far.
- Tub removal and surround demolition
- New waterproofed, sloped shower pans
- Tile and solid-surface shower walls
- Recessed niches and built-in benches
- Frameless and semi-frameless glass
- New valves, drains and showerheads
What's Included in Your Tub-to-Shower Conversion
Careful removal of the old tub and surround, inspection of the framing and subfloor, and haul-away, so the new shower starts on a sound base.
A properly sloped, waterproofed shower pan with a new drain, turning the old tub footprint into a leak-proof walk-in base.
Tile or low-maintenance solid-surface walls with a recessed niche and an optional bench, sealed and built to last.
A frameless or semi-frameless glass panel, a new pressure-balanced valve, and a rain or handheld showerhead in your chosen finish.
What a Tub-to-Shower Conversion Costs
| Project | Typical range | Source |
|---|---|---|
| Tub-to-shower conversion (installed) | $1,500 to $8,000 (average about $3,000) | HomeAdvisor 2025, national average |
Conversions that reuse the existing drain and valve run toward the low end; tiled walls, a curbless entry or a relocated drain run higher. These are typical installed ranges, not quotes. Financing can be discussed at consultation, see Financing.
Planning a Tub-to-Shower Conversion
A conversion looks simple, but most of the work is behind the walls. Once the old tub comes out, we check the framing, subfloor and drain before building the new pan. Proper waterproofing and slope are what keep the finished shower leak-free for years.
Layout comes next. Most conversions keep the tub footprint, but we plan the entry, the bench and niche placement, where the glass lands and how the drain runs. A low-threshold or even curbless entry is often possible depending on the floor. The result is a bathroom that feels bigger, is far easier to clean, and is much safer to step into.
Finish selections should be practical first. Large-format porcelain tile means fewer grout lines to clean, linear drains make curbless showers work, and a quality shower valve is worth more than a decorative trim kit.
Tub-to-Shower Conversion Cost Drivers in Dunwoody
A basic conversion that keeps the existing drain and valve location runs toward the low end of the range. Tiled walls versus solid-surface, a curbless entry, glass choice, and relocating the drain move the number most. A City of Dunwoody permit is typically required when plumbing or electrical is moved or added.
- Moving the toilet, shower or vanity drains
- Curbless shower conversion and floor work
- Tile size, pattern and coverage
- Glass enclosure type
- Vanity size, top material and storage
- Ventilation and lighting upgrades
How a Project Works
- 1
Discovery & Consultation
We walk the space with you, talk through goals and budget range, and note anything structural, electrical or plumbing that affects scope.
- 2
Design & Scope Development
Layout, selections and a written scope with a price range. Anything that needs a City of Dunwoody permit is identified here.
- 3
Construction
Permitted work is built and inspected in sequence. You get a schedule and a single point of contact.
- 4
Punch-List & Walkthrough
We walk the finished project together, list anything that needs attention, and close it out.
Permit requirements are set by the City. See the City of Dunwoody residential building permits page.
Tub-to-Shower Conversion FAQ
Do I need a permit for a tub-to-shower conversion?
If plumbing or electrical is moved or added, or walls change, a City of Dunwoody permit is typically required. A like-for-like conversion that reuses the existing drain usually is not. We confirm during Design & Scope Development.
How long does a tub-to-shower conversion take?
Most conversions take several days to about a week, depending on whether the walls are tiled and whether the drain has to move.
Is a curbless shower possible in my house?
Often, but it depends on the floor structure. We check during the consultation.
How do I get started?
Request an estimate or call (470) 847-9076.
Serving Dunwoody ZIP codes 30328, 30342, 30350 and nearby Dunwoody, Buckhead, Brookhaven.
Start Your Tub-to-Shower Conversion
Tell us about your tub and we will walk through pan, wall, glass and fixture options for your Dunwoody conversion.