Updated October 2026

Remodeling Costs in Sandy Springs, GA (2026)

Most remodelers will not publish numbers. We think you should walk into a consultation already knowing the typical range for your project, so here are published Atlanta-area ranges, where they come from, and what pushes a project up or down.

Typical Atlanta-Area Remodeling Costs

ProjectTypical rangeSource
Minor kitchen remodelAbout $28,000Remodeling Cost vs Value 2025, Atlanta
Major midrange kitchen remodelAbout $80,000Remodeling Cost vs Value 2025, Atlanta
Bathroom remodel$7,400 to $19,000 (average about $13,000)Angi
Basement finishing$15,000 to $75,000 (average about $32,000)Angi
Whole-home remodel$167 to $218 per square footBlock Renovation

These are published typical ranges, not quotes. Your price comes from your written scope after a consultation. Financing can be discussed at consultation, see Financing.

What Moves the Number

Two kitchens with the same footprint can land $40,000 apart because of layout changes and selections. The fastest way to an accurate number is a consultation and a written scope.

  • Moving walls, especially load-bearing ones that need a beam
  • Relocating plumbing, gas or major electrical
  • Cabinet construction and countertop material
  • Appliance package and ventilation requirements
  • How much existing finish has to come out
  • Permit scope and any required inspections

How Payments Typically Work

Remodeling projects are usually paid in stages: a deposit when the contract is signed, progress payments as defined milestones are completed, and a final payment after the punch-list walkthrough. Your contract spells out the exact schedule.

More Remodeling Costs to Plan Around

Beyond kitchens, baths and basements, these published figures help Sandy Springs homeowners plan other common projects. A tub-to-shower conversion typically costs $1,500 to $8,000, with a national average around $3,000 (HomeAdvisor, 2025). Hardwood floor installation typically costs $2,469 to $7,034, or about $6 to $25 per square foot (HomeAdvisor, 2025). Home additions typically cost $21,895 to $83,355, or about $80 to $200 per square foot for standard additions (HomeAdvisor, 2025). Building a deck averages about $8,246 nationally, with a typical range of $4,341 to $12,586 (Angi data via NerdWallet, 2025).

Remodeling costs in Sandy Springs often land above national averages because many homes are larger, older and on sloped lots. Use these figures to set a planning range, then get a written scope for your house.

How to Set a Realistic Budget

  • Decide what must be done now and what can be phased
  • Choose your non-negotiables before selections
  • Hold a contingency for hidden conditions in older homes
  • Finalize selections before demolition
  • Ask what is included and what is an allowance
  • Plan the payment schedule with your lender early

How a Project Works

  1. 1

    Discovery & Consultation

    We walk the space with you, talk through goals and budget range, and note anything structural, electrical or plumbing that affects scope.

  2. 2

    Design & Scope Development

    Layout, selections and a written scope with a price range. Anything that needs a City of Sandy Springs permit is identified here.

  3. 3

    Construction

    Permitted work is built and inspected in sequence. You get a schedule and a single point of contact.

  4. 4

    Punch-List & Walkthrough

    We walk the finished project together, list anything that needs attention, and close it out.

Permit requirements are set by the City. See the City of Sandy Springs residential building permits page.

Remodeling Cost FAQ

How much does a kitchen remodel cost in Sandy Springs?

Published Atlanta figures put a minor kitchen remodel at about $28,000 and a major midrange kitchen at about $80,000 (Remodeling Cost vs Value 2025). Your price depends on layout changes and selections.

How much does a bathroom remodel cost?

Angi reports a typical range of $7,400 to $19,000, with an average around $13,000. Primary baths with curbless showers and custom vanities run higher.

How do I get a price for my project?

Call (470) 847-9076 or request an estimate. We start with a consultation and give you a written scope with pricing.

Get a price for your project

Tell us the room, the budget range and the timing. We will follow up to schedule a consultation.